The Printing Ink Manual: 4th edition

1 The Nature of Printing Inks.- 1.1 Visual characteristics of inks.- 1.2 The nature of printing inks as determined by the printing process.- 1.3 The drying characteristics.- 1.4 The adhesive nature of printing inks.- 1.5 The resistance properties of printing inks.- 2 The Printing Processes.- 2.1 The letterpress process.- 2.2 The offset lithographic process.- 2.3 The gravure process.- 2.4 The flexographic process.- 2.5 The screen printing process.- 2.6 Non-impact printing processes.- 2.7 Other printing processes.- 2.8 Print recognition.- 2.9 Substrate selection.- 2.10 The need for communication.- 3 Colour and Colour Matching.- 3.1 The physical nature of colour.- 3.2 The perception of colour.- 3.3 Additive and subtractive colour mixing.- 3.4 Origins of colour in printed material.- 3.5 Graphic reproduction.- 3.6 The measurement of colour.- 3.7 The recording of colour data and the specification of colour.- 3.8 Colour matching.- 3.9 Instrumental colour match prediction.- References.- 4 Raw Materials.- Section I Pigments.- 4.1 Yellow pigments.- 4.2 Orange pigments.- 4.3 Red pigments.- 4.4 Green pigments.- 4.5 Blue pigments.- 4.6 Violet pigments.- 4.7 Brown pigments.- 4.8 Black pigments.- 4.9 White pigments and extenders.- 4.10 Pearlescent materials.- 4.11 Metallic pigments.- 4.12 Fluorescent pigments.- 4.13 General properties of pigments.- Section II Dyestuffs.- 4.14 Acid dyes.- 4.15 Basic dyes.- 4.16 Solvent dyes.- 4.17 Disperse dyes.- Section III Oils.- 4.18 Drying vegetable oils.- 4.19 Other oils.- Section IV Resins.- 4.20 Natural resins.- 4.21 Synthetic resins.- Section V Solvents.- 4.22 Hydrocarbon solvents.- 4.23 Alcohols.- 4.24 Glycols.- 4.25 Ketones.- 4.26 Esters.- Section VI Plasticisers.- Section VII Waxes.- 4.27 Synthetic waxes.- 4.28 Petroleum waxes.- 4.29 Natural waxes.- Section VIII Driers.- 4.30 Liquid driers.- 4.31 Paste driers.- Section IX Miscellaneous additives.- 4.32 Chelating agents.- 4.33 Antioxidants.- 4.34 Surfactants.- 4.35 Deodorants and reodorants.- 4.36 Pure chemicals.- 4.37 Defoaming agents.- 4.38 Laking agents.- Section X Raw materials for radiation curing systems.- 4.39 Pigment selection.- 4.40 Prepolymers.- 4.41 Reactive diluents.- 4.42 Photoinitiators.- 4.43 Additives and inhibitors.- Section XI Health and safety at work.- References.- 5 Letterpress Inks.- 5.1 Nature of the process.- 5.2 General characteristics of letterpress inks.- 5.3 Physical properties.- 5.4 Raw materials.- 5.5 Letterpress ink formulation.- 5.6 Ink-related problems and their possible solutions.- 5.7 New developments.- 6 Lithographic Inks.- 6.1 General characteristics of litho inks.- 6.2 Drying mechanisms.- 6.3 Physical properties.- 6.4 Formulating principles.- 6.5 Typical inks and varnishes.- 6.6 Ink-related problems and their possible solutions.- 6.7 Recent and future trends.- 7 Gravure Inks.- 7.1 General characteristics.- 7.2 Physical properties of inks and their measurement.- 7.3 Formulating principles.- 7.4 Inks and varnishes for specific end-use applications.- 7.5 Printing ink faults.- 7.6 Future developments.- 8 Flexographic Inks.- 8.1 General characteristics of the inks.- 8.2 Physical properties of flexographic inks and their measurement.- 8.3 Formulating principles.- 8.4 Inks and varnishes for special purposes.- 8.5 Ink-related printing problems and possible solutions.- 8.6 Recent and future trends.- 9 Screen Inks.- 9.1 Important characteristics of screen inks.- 9.2 Requirements of raw materials.- 9.3 Inks for paper and board.- 9.4 Inks for impervious surfaces.- 9.5 Inks for plastic containers.- 9.6 Textile inks.- 9.7 Transfer inks.- 9.8 Overprint varnishes.- 9.9 Daylight fluorescent inks.- 9.10 Process inks.- 9.11 Metallics.- 9.12 Ink-related printing problems.- 9.13 Recent and future trends.- 10 Radiation Curable Systems.- 10.1 Electromagnetic radiation and electron beams.- 10.2 Microwave and radio frequency drying.- 10.3 Infra-red curing systems.- 10.4 Ultraviolet and electron beam curable inks and varnishes.- 10.5