Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume

Reconstruction of Spatially Varying Random Material Properties by Self-optimizing Inverse Method.- Performance Assessment of Integrated Digital Image Correlation Versus FEM Updating.- IGMU: A Geometrically Consistent Framework for Identification From Full Field Measurement.- Characterization of the Dynamic Strain Hardening Behavior From Full-field Measurements.- Bridging Kinematic Measurements and Crystal Plasticity Models in Austenitic Stainless Steels.- Inverse Identification of Plastic Material Behaviour Using Multi-scale Virtual Experiments.- An Effective Experimental-numerical Procedure for Damage Assessment of Ti6Al4V.- Identification of the YLD2000-2D Model With the Virtual Fields Method.- Identification of Post-necking Strain Hardening Behaviour of Pure Titanium Sheet..- Keynote: Challenges for High-pressure High-temperature Applications of Rubber Materials in the Oil and Gas Industry.- Mechanical Behavior of Poly (2,5-benzimidazole) (ABPBI).- Full-field Strain Imaging of Ultrasonic Waves in Solids.- Acoustic Emission Analysis in Titanium Grade 5 Samples During Fatigue Test.- Analysis of High-frequency Vibrational Modes through Laser Pulses.- Acquisition of Audio Information From Silent High Speed Video.- Overview of The Effects Of Process Parameters On The Accuracy In Residual Stress Measurements By Using HD and ESPI.- Near Weld Stress Analysis With Optical and Acoustic Methods.- Nondestructive Characterization of Thin Film System With Dual-Beam Interferometer.- Effect of Horn tip Geometry on Ultrasonic Cavitation Peening.- Fatigue Damage Analysis of Aluminum Alloy by ESPI.- Dynamic Failure Mechanisms in Woven Ceramic Fabric Reinforced Metal Matrix Composites During Ballistic Impact.- Digital Image Correlation Analysis and Numerical Simulation of the Aluminum Alloys Under Quasi-static Tension After Necking Using the Bridgman's Method.- Robust Intermediate Strain Rate Experimentation Using the Serpentine Transmitted bar.- Testing Program for Crashworthiness Assessment of Cutaway Buses.- In-Situ DIC and Strain Gauges to Isolate the Deficiencies in a Model for Indentation Including Anisotropic Plasticity.- Analysis of Laser Weld Induced Stress in a Hermetic Seal.- A Summary of Failures Caused by Residual Stresses.- Comparative Analysis of Shot-peened Residual Stresses Using Micro-hole Drilling, Micro-slot Cutting, X-ray Diffraction Methods and Finite-element Modelling.- Thermal Deformation Analysis of an Aluminum Alloy Utilizing 3D DIC.- Hybrid Full-field Stress Analysis of Loaded Perforated Asymmetrical Plate.- Automated Detection of CFRP Defects by Infrared Thermography and Image Analysis.- Modelling the Residual Stress Field Ahead of the Notch Root in Shot Peened V-Notched Samples.- Numerical Prediction of Temperature and Residual Stress Fields in LFSW.- Residual Stress Measurement on Shot Peened Samples Using FIB-DIC.- Residual Stress in Injection Stretch Blow Molded PET Bottles.- Applying Infrared Thermography and Heat Source Reconstruction for the Analysis of the Portevin-le Chatelier Effect in an Aluminum Alloy.- Applying a GAD Filter to Calculate Heat Sources From Noisy Temperature Fields.- Contour Method Residual Stress Measurement Uncertainty in a Quenched Aluminum bar and a stainless Steel Welded Plate.- On the Separation of Complete Triaxial Strain/stress Profiles From Diffraction Experiments.- Residual Stress Mapping With Multiple Slitting Measurements.- A Novel Approach for Biaxial Residual Stress Mapping Using the Contour and Slitting Methods.- Measurement of Residual Stresses in B4C-SiC-Si Ceramics Using Raman Spectroscopy.- Hole Drilling Determination of Residual Stresses Varying Along a Surface.- Sensitivity Analysis of i-DIC Approach for Residual Stress Measurement in Orthotropic Materials.- Stress Measurement Repeatability in ESPI Hole-drilling.- Some Aspects of the Application of the Hole Drilling Method on Plastic Materials.