Characterization of Minerals, Metals, and Materials 2017

Part 1: Soft Materials.- Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites.- Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique.- Izod impact tests in polyester matrix composites reinforced with blanket of the malva and jute fibers.- Tensile Behavior of Epoxy Matrix Composites Reinforced With Eucalyptus Fibers.- The dimensional characterization of jute fabric strips for reinforcement in composite polymeric.- Izod Toughness Behavior of Continuous PALF Fibers Reinforced Polyester Matrix Composites.- Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide.- Radiation Effects on Crosslinking of Butyl Rubber Compounds.- Part 2: Clays and Ceramics.- Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer.- Aging behaviour in Ni0.5CoxMn2.5-xO4 (x=0.5, 0.8 and 1.1) thermistors.- Adsorption of lead from aqueous solutions to bentonite and composite.- Part 3: Electronic, Magnetic, Environmental, and Advanced Materials.- Characterization Of Low-Zinc Electric Arc Furnace Dust.- GAMMA-RADIATION EFFECT ON BIODEGRADABILITY OF SYNTHETIC PLA STRUCTURAL FOAMS PP/HMSPP BASED.- STUDY OF FLEXIBLE FILMS PREPARED FROM PLA/PBAT BLEND AND PLA e-BEAM IRRADIATED AS COMPATIBILIZING AGENT.- Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method.- Part 4: Nano Materials.- Electrical and microstructural investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 temperature sensors.- Enhanced physical properties of thin film nanocomposites.- A study on the size and type of inclusions in Si-Mn combined deoxidated low carbon steel strip.- Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-powder Composites.- Part 5: Alloys.- Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101.- MICROSTRUCTUAL INVESTIGATION AND IMPACT TESTING OF ADDITIVE MANUFACTURED TI-6AL-4V.- Part 6: Powders and Foams.- SYNTHESIS OF TiN NANO-COMPOSITE POWDER BY HIGH-ENERGY BALL MILLING OF TiH2 UNDER NITROGEN ATMOSPHERE.- Application of AFM in Morphology Determination of Powder Material.- Effects of Thermal Processing on Closed-Cell Aluminium Foams.- Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams under Drop Weight Impact.- Deformation Mechanisms of Closed Cell-Aluminium Foams during Drop Weight Impact.- Part 7: Minerals.- INDUSTRIAL USE OF BRAZILIAN BENTONITE MODIFIED BY MILD ACID ATTACK.- Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation.- Ore Dressing and Technological characterization of Palygorskite from Piauí/Brazil for applications as adsorbent of heavy metals.- TECHNOLOGICAL CHARACTERIZATION OF WASTE FROM GOLD MINING DAM.- Synthesis and Characterization of Sodalite and Cancrinita from Kaolin.- Part 8: Ferrous Metals.- Effects of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter.- Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis.- Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO-CO2 Atmospheres.- Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors.- Important Factors to Consider in FIB Milling of Crystalline Materials.- Part 9: Material Processing and Corrosion.- Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl media.- Effect of bromide ions on the pitting corrosion of hafnium in anhydrous t-butanol and acetonitrile.- Compression Behavior of Semi-Closed Die Forged AZ80 Extrusion.- Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique.- Part 10: Method Development.- Development of A New Recycling Process of PGM from Metal-supported Catalyst Using Complex Oxide.- Part 11: Composites.- High thermal conducting composites using percolation theory.