8th International Symposium on High-Temperature Metallurgical Processing

Part 1: Energy Efficient Clean Metallurgical Technology.- Flash Ironmaking from Magnetite Concentrate in a Laboratory Reactor: Experimental and CFD Work.- Synthesis of Chromite for Subsequent Carburization by Methane-hydrogen Gas Mixture.- Effects of Hydrogen-enriched Reduction on Metallurgical Properties of Iron-Bearing Burdens under BF Operation with Cog Injection.- Microwave-intensified Reduction of Biochar-containing Briquettes.- Refractory Challenges in Lead Recycling Furnaces.- Synthesis of Carbide Ceramics via Reduction of Adsorbed Anions on an Activated Carbon Matrix.- Part 2: Simulation of High Temperature Process.- A CFD Based Algorithm for Kinetics Analysis of the Reduction of Hematite Concentrate by H2+CO Mixtures in a Drop Tube Reactor.- A Continuous Dynamic Process Model to Design a Carbon Profile toward Yield Improvement.- Alloy Yield Prediction Model Based on the Data Analysis in EAF Steelmaking Process.- Analysis of Jet Behavior and Surface Fluctuations in the Meniscus of Fluid in a Physical Model of a Beam Blank Mold and CFD Modelling.- CFD Study of Gas-liquid Phase Interaction Inside a Submerged Lance Smelting Furnace for Copper Smelting.- Debottlenecking High Temperature Metallurgical Plants through Modeling and Simulation.- Assessment of Slag Entrainment in a RH Degasser through Physical Modelling Using Circulating Fluids of Different Densities/Oil Systems for Simulating Steel Melt/Slag.- Part 3: Fundamental Research of Metallurgical Process.- Investigate on the Phase Composition of Vanadium Slag with High CaO Content and Influence of P2O5 on Crystallization Kinetics of Spinels.- Thermal Analysis Kinetics of the Solid-State Reduction of Nickel Laterite Ores by Carbon.- Thermodynamic and Experimental Investigations of High Temperature Refractory Corrosion by Molten Slags.- Thermodynamic Calculation on the Reactivity between Slag and Ti-stabilized Stainless Steel.- Part 4: Alloys and Materials Preparation.- Development of a Novel, Low-cost Titanium Extraction Process for Bulk or Powder Applications.- Evolution of Non-metallic Inclusions in Solid Fe-Al-Ti-N Alloy during Heating.- Preparation of Low-carbon Ti2O3 by Carbon thermal Reduction of the Mixture of Titanium Dioxide and Activated Carbon under Vacuum Condition.- Pyrometallurgical Studies for Manganese Extraction Using Turkish Ore Reserves.- Trace Elements Behavior during the Oxidation of Liquid SiMn Alloy.- Effect of Microalloy Elements V And Mg on Organization at High Heat Input Welding Shipbuilding Structure Steel.- Part 5: Extraction and Recovery of Metals.- Effect of Carbon Reductant On The Formation of Copper Doped Titanium Oxycarbonitride by Carbothermal Reduction and Nitridation.- Cohering Behavior of Scrap Powder in Kiln by a Novel Natural Stacking Method.- Direct-to-blister Copper Smelting with the ISASMELT(TM) Process.- Improving Separation of Cu-Fe from Copper Slag by Mineral Phase Reconstruction.- Phase Transformation of High Calcium Type Tin, Iron-bearing Tailings during Magnetizing Roasting Process.- Sensitivity of Contactless Ultrasound Processing to Variations of the Free Surface of the Melt with Induction Heating.- Extraction of Zinc from Willemite by Sodium Salt Roasting and Ammonia-leaching Process.- Part 6: Ironmaking and Steelmaking.- Influence of Puhrstahl Heraeus Refining Process on Aluminum Consumption in Interstitial-Free Steel Smelting Process.- Formation Mechanisms of Inclusions in Spring Steels.- Investigation on Coal Combustion Behaviors under the Oxygen Blast Furnace.- Inclusion Control with Ca Treatment to Improve Castability of a Low Carbon Al Killed Steel.- High Temperature Mineralization Mechanism of Granules during Iron Ore Sintering Process.- Reduction Behaviors of Sinter Made from Magnetite Concentrates in Reducing Process Simulated COREX Shaft Furnace.- Part 7: Treatment and Recycling of Slag/Wastes.- Introduction of Matte Droplets in Copper Smelting Slag.- Dissolution Behavior of Fe from Glassy Oxide Phase in Steel